specification


	Designed by Farmers for Farmers

Full width: 800 mm to 350 mm when fully closed Body length: 3 metres including veterinary area Main frame: Constructed of 70 x 70 mm box section Access: From race, through split doors Doors covered both sides with 3 mm plate Doors run on nylon rollers. Veterinary area: Personnel gate on the right side Rump gate and plated heel gate on the left side Main body: 2.3 m in length with three access gates on each side:- Bottom gates - Constructed from 50 x 50 mm box section and covered with 3 mm plate on the inside Middle gates - Constructed from 50 mm diameter pipe Top gates - Constructed from 50 mm pipe, with arm access on the left side at the front Main side frame: Arm access for the neck area on both sides Gates: All gates have cam latches for easy opening and closing c/w grease nipple on each hinge Moving parts: Greaseable ball joints for lubrication	Head stock: Constructed from 75 x 50 mm box section and covered with 3 mm plate on the inside. Nylon running gear allows a smooth opening and closing action Chin scoop: Operated via one of two hydraulic spool valve locations:- 1. From the chin scoop body 2. From the spool valve chest Spool valve chest: Five spool valve chest located on the left side near the access door from the race Spool valves 1 - 5 (Left to Right) 1. - Chin scoop 2. - Head stock 3. - Parallel side squeeze 4. - Split access door from race 5. - Blank Possible integration with another operation such as a drafting gate at the front of the crush or a slide gate in the race Floor: Whole floor length covered in 5 mm chequer plate supported by 40 x 40 mm box section Power pack: 60 litre capacity power pack Powered by a 2.2HP single phase motor Can also be powered by tractor hydraulics Weight: Approx. 1450 kg